HYDRAULICALLY POWERED TUBE COLD END FORMING MACHINE
Applications: expansion of nominal diameter, chamfering, slotting and flaring. Particular attention has been given to the structure of the machine (heavy duty, vibration free, with precise use of tooling, longer life of tooling and better quality workpiece) with a completely interchangeable tool system. Tooling is interchamgeable with tools of other international manufacturers; Rapid manual tool change; A hydraulic tool lifter is supplied with the machine; Hydraulic unit is located inside machine base; On the top part of the base there are the hydraulic cylinders which activate the tooling operation.
The machine is supplied with air/oil heat exchanger for hot climates and when continuous heavy duty work is required. Thanks to its reduced dimensions and the wheels it is equippedwith, the FORM BROWN can be easily integrated with working centers, where robotized tube movement, or manipulators, transfer tube automatically during loading and unloading phase. This type of machine does not require clamping vices, and since special shaped jaws are not necessary to clamp tubes, the above operations are simplified on bent tubes. Averagecycle time, depending on type of production: approx. 1.5 seconds.
| SPECIFICATIONS | Max. tube diameter
| mm
| ø 80 x 2
| Working stroke
| mm
| 0 ÷ 60
| Working pressure
| bar
| 100 | Maximum working pressure
| bar | 140
| Hydraulic cylinder thrust
| N
| 100000
| Hydraulic pump power
| kW
| 7.5
| Work unit thrust force
| N | 82500
| | Max working pressure | bar | 105 | Height of working axis
| mm | 950 | Dimesions (L x W x H)
| mm
| 530 x 1250 x 1268
| Hydraulic control unit oil tank capacity
| L
| 160
| | Weight (without oil and tools) | kg
| 530
|
DOWNLOAD:- For further information: click here
- See the machine video: click here
|
